Searching... Please Wait.

Join The Community Check out our user forums and get the most from your gear.

ZED Dreadnought

Our Products: Amplifiers

ZED Dreadnought

ZED Dreadnought	ZED Dreadnought	ZED Dreadnought
ZED Dreadnought
(Click to see larger image and other views)

SKU: dreadnought

Brand: Zed Audio

225 watts x 4 @ 4 ohm More details...

Channels: 4-Channel

You can earn 20 Reward Points on this product!

Price: $788.00

No shipping required

Continuous power - 225 watts x 4 into 4 ohm or 400w x 4 into 2 ohm.
Continuous bridged power - 400w x 2 into 8 ohm or 800w x 2 into 4 ohm.
Minimum impedance (non bridged) - 2ohm
Minimum impedance bridged - 4ohm
"Active" capable crossover functionality
Dimensions - 9.7" x 2.1" x 16.14"
Built/Engineered in the USA.
Free Shipping

Caution: Specifications you compare to other manufactures may not always be an accurate or truthful representation

Dreadnought specifications

Continuous output power into 2 ohm - 400w x 4
Continuous Output Power into 4 ohm - 225w x 4
Typical Output Power into 4 ohm per channel (1% THD) - 280 w x 4
Continuous Output Power 3 pairs of channels bridged into 4 ohm - 800w x 2 Channel pairs may be bridged independently
Continuous Output Power 2 channels bridged into 8 ohm - 450w x 2 Channel pairs may be bridged independently
Minimum Speaker Impedance - 2 ohm per channel
Minimum Speaker Impedance in Bridge Mode (2 channels) - 4ohm
Power Response at any power into 4 ohms - 10-60HHz-2dB
Frequency Response at rated power into 4 ohms - 10Hz-30KHz -0.1dB
Input voltage range for at rated power into 4 ohms - 0.26 to 8.0 volt
Input Impedance at 2KHZ - 47K ohm
Noise below rated output (30KHz limited) - 102dB
Channel separation at 2KHz - >80dB
Damping Factor at 20Hz with 4 ohms - >80
Total Harmonic Distortion with 4 ohm - 20Hz - 20KHz
From 1 watt to rate power. Typically less than 0.05 - <0.2%
Intermodulation Distortion - <0.2%
Phase response at 20KHz - Lagging 12 deg
Slew rate (volts per micro second) - In “Flat” mode - 12
Low Pass Crossovers (24dB/octave) - 55Hz to 4KHz
High Pass Crossovers (24dB/octave) - 55Hz-4KHz
Sub Sonic Filter (24dB/octave) - 11Hz to 48Hz
Equalization (Zero to +12dB variable control with constant Q) - Boost @40Hz with constant Q
Line Outputs - No
Protection- Short Circuit, DC, Thermal - Yes
Power Source-10-14.5v DC Negative Ground
Current Consumption with Sinewave at 4 ohms - 94A
Current Consumption with Music at 4 ohms - 18 to 28A
Idling Current - <1.5A
Fuse rating with 4 ohm load - 30A-40A depending on usage
Fuse rating with 2 ohm load - 40A-80A depending on usage
Size W x H (247mmx55mm/9.7”x2.1”) x L - 410mm/16.14”
Shipping Weight (Kg/Lbs) - 5.9/13

Link to the 2011 ZED owners manual:
http://www.zedaudiocorp.com/pdfs/ZedManual-2011.pdf

ZED's design philosophies have been influenced by both professional and home audio markets for industry leading Class D technology for optimum control and sound quality. The all the new ZED built amplifiers utilize the latest generation of low gate charge high current MOSFETs, a two stage power supply for increased efficiency and new super high speed low-noise IC chips. These are just some of the many unique features that a ZED built amplifier has to offer.