Searching... Please Wait.

Join The Community Check out our user forums and get the most from your gear.

ZED Minotaur

Our Products: Amplifiers

ZED Minotaur

ZED Minotaur	ZED Minotaur	ZED Minotaur
ZED Minotaur
(Click to see larger image and other views)

SKU: minotaur

Brand: Zed Audio

1000 watts x 1 @ 2 ohm More details...

Channels: Monoblock

You can earn 15 Reward Points on this product!

Price: $559.00

No shipping required

Continuous power - 500 watts x 1 into 4 ohm or 1000w x1 into 2 ohm.
Minimum impedance - 2ohm
Full range mono block
Dimensions - 9.7" x 2.1" x 10.82"
Built/Engineered in the USA
Free Shipping

Caution: Specifications you compare to other manufactures may not always be an accurate or truthful representation

Minotaur specifications

Continuous output power into 2 ohm - 1000w x 1
Continuous Output Power into 4 ohm- 500w x 1
Typical Output Power into 4 ohm per channel (1% THD) - 650w x 1
Continuous Output Power 3 pairs of channels bridged into 4 ohm - 2000w x 1
Continuous Output Power 2 channels bridged into 8 ohm - 100w x 1
Minimum Speaker Impedance - 2 ohm
Power Response at any power into 4 ohms - 10-60HHz-2dB
Frequency Response at rated power into 4 ohms - 10Hz-30KHz -0.1dB
Input Impedance at 2KHZ - 0.25 tp 8.6 volt
Noise below rated output (30KHz limited) - -103dB
Damping Factor at 20Hz with 4 ohms - >80
Total Harmonic Distortion with 4 ohm 20Hz - 20KHz
From 1 watt to rate power. Typically less than 0.05 - <0.2%
Intermodulation Distortion - <0.2%
Phase response at 20KHz - Lagging 12 deg
Slew rate (volts per micro second) - In “Flat” mode - 12
High Pass Crossovers (48dB/octave) - 10Hz to 100Hz
Low Pass Crossovers (24dB/octave) - 45Hz to 230Hz
Equalization (5 controls +/-12dB boost and cut) - 25Hz, 31Hz, 40Hz, 50Hz, 63Hz with constant Q
Phase Control - Variable from zero to -180 degrees
Line Outputs (normal and Inverted phase) - Yes
Protection- Short Circuit, DC, Thermal - Yes
Power Source -10-14.5v DC Negative Ground
Current Consumption with Sine wave at 4 ohms - 52A
Current Consumption with Music at 4 ohms - 11 to 15A
Idling Current - <1.5A
Fuse rating with 4 ohm load - 25A-35A depending on usage
Fuse rating with 2 ohm load - 40A-60A depending on usage
Size W x H (247mmx55mm/9.7”x2.1”) x L - 275mm/10.82" Excludes connectors
Shipping Weight (Kg/Lbs) - 5.9/13

Link to the 2011 ZED owners manual:
http://www.zedaudiocorp.com/pdfs/ZedManual-2011.pdf

ZED's design philosophies have been influenced by both professional and home audio markets for industry leading Class D technology for optimum control and sound quality. The all the new ZED built amplifiers utilize the latest generation of low gate charge high current MOSFETs, a two stage power supply for increased efficiency and new super high speed low-noise IC chips. These are just some of the many unique features that a ZED built amplifier has to offer.